Categories
Maker/Development

iBox nano 3D printer lets you make stuff anywhere

With 3D printing enjoying increasing coverage nowadays, more and more people are beginning to understand the possibilities. As a result, eyes widen at the concept, but not as many people have actually had hands-on experience because of the prohibitive costs. For those who currently do use 3D printers, it’s more likely someone wants to only print smaller objects, but has to shell out for a costly, large printer to get it done.

iBox Printers has created the iBox nano 3D: the world’s smallest and quietest 3D printer. Weighing in at three pounds, the device is capable of untethered resin printing over Wi-fi using any browser on any device, eliminating concerns of compatibility. The product was also conceived with the home user in mind, so there is no software to install. In addition, this product takes advantage of the large amount of open-source 3D modeling software and uses UV LEDs instead of DLP projector bulbs which last longer and use less power. The 328 micron resolution of the XY axis complements the .39 micron resolution on the Z-axis so that users can print fine detail without breaking the bank for more expensive printers. The company is looking to raise a whopping $300,000 in total. 3D printing pioneers can get their hands on one for $269.

The iBox nano 3D piques interest considering its portable, lightweight, and extremely open nature. The Pocket 3D printer has also positioned itself as a portable printer and, even if it’s form factor doesn’t quite lend itself to portability, what it produces doesn’t have a curing period like the iBox nano 3D. This is the biggest oversight: the iBox may be portable, but it doesn’t mean it will be actually usable everywhere as the resin supplied has very specific handling concerns. That might impede its practicality and may or may not be enough to turn people off, but its price point will probably ensure it won’t be much of a problem.

Categories
Arts Technology

CreoPop pen lets users create 3D art with UV light

CreoPopThe fascination with drawing in the air and the 3d effect that makes art seem to come to life has been an amazing journey. From the not so distant days of heated plastic and 3Doodler, to the slimmed down Lix pen that could function with either heated or cooled plastic, to today’s CreoPop that is wireless and uses only cooled plastic, it’s been an exciting development. So how does this wireless art tool allow the user to create their masterpieces? By the use of  photopolymers that are solidified using UV light. This means there is no bad smell, and that there are a multitude of color options available, some of which even glow in the dark. For $89 plus $15 for shipping, backers get a starter kit and expected delivery of March 2015.

Categories
Arts Maker/Development

Lix slims down the 3D scribbler to standard pen size

lixTech-addicted early adopters and stubbornly cautious pessimists can agree on one thing: the possibilities of 3D printing are awesome. Now, a 3D printing pen, Lix, allows artists to use melted and cooled plastics to draw three-dimensional objects in real time the same way a pen would be used. If this all sound familiar, that’s because the Lix follows closely in the footsteps of the successful 3Doodler, though the latter’s campaign trades silly doodles in for the trendy European art crowd. Either way, this device looks just as capable of handling 3D art of any kind, created easily and instantly brought to life. Lix leaves its mark on the art world in December 2014 for pledges of £82 or more.

Categories
Cooking

Foodini makes you the the prints of food design

editors-choiceThe Premise. Who doesn’t get excited at the revolutions being made possible every day by advancements in the field of 3D printing? And who doesn’t want a personal robo-chef to crank out elegantly designed plates with no effort whatsoever? Here’s what happens when these two exciting ideas are combined.

The Product. Designed to make healthy eating easier and revolutionize the home cooking process once more, the pun-tastic Foodini is a consumer-grade 3D printer that is meant to bring out the best in fresh ingredients. Using a series of reusable capsules that food can be mashed or pureed into, and then after selecting a recipe and design, the Foodini goes to work. For those worried about how to operate a 3D printer, the Foodini has a touch screen panel on the front that connects to its own site where templates can be downloaded and used, recipes can be bookmarked, and even uploaded and shared. From there, Foodini says what to put in when and handles the rest.

The Pitch. Co-founder of Natural Machines Lynette Kucsma introduces us to the Foodini and initially shows that it can make something that looks like farmer’s market baby food, but as the video goes on, and through the campaign photos, it’s quickly mouthwatering just what can be made with this printer. Anxieties about learning a new kitchen tool are also laid to rest with simple diagrams outlining how easy it is to operate a Foodini. Natural Machines needs to raise $100,000 to put together the community site and begin mass production.

The Perks. Unsurprisingly, a Foodini will set backers back $999, $300 off the retail price, and can start impressing everybody else by January of 2015. Those who don’t want to wait can pay extra for an earlier production run, the earliest being available October 2014 for backers who pledge $2,000.

The Potential. It’s impossible not to be excited about the idea of having a 3D food printer in the home. While it’s still a ways off from replicating an Irish breakfast or even downloading pizza rolls, Foodini takes all the convenience of eating out of cans and boxes and brings it to fresh, healthy ingredients. The price point is enticingly low, especially considering that a microwave cost over $10,000 in today’s dollars when they hit the market. It may seem extravagant now, but this is a clear sign of a new era for stomachs everywhere.